Airberlin198 Geschrieben 25. Februar 2012 Teilen Geschrieben 25. Februar 2012 Hallo alle zusammen! Ich habe mir letztens die Boeing 747-8i von Sky Spirit 2011 heruntergeladen. Ich muss echt sagen, es sind wundervolle Texturen! :005: Nur ein Problem ist bei mir aufgetaucht: Das Flugzeug fliegt immer nach unten, egal was man macht. Die Nase nach oben zu bringen, ist bei mir unmöglich. http://www.myimg.de/?img=201222523152032831780.jpg Wäre sehr froh, wenn mir jemand sagen könnte, woran es liegt? :007: Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Airbasil Geschrieben 26. Februar 2012 Teilen Geschrieben 26. Februar 2012 Hallo Thomas 1. Das geht hier auch so: 2. Mögliche Lösung: - Das sieht mir nach nem Stall bzw Strömungsabriss aus (bei der Tiefe in der du fliegst, da kann man dich ja nicht mal auf dem Radar finden :P) Bist du evtl von einer zu kurzen Rwy gestartet? Dann wärs klar dass du noch viel zu schwer bist und deswegen wieder abschmierst! - Check mal deine Gewichtsverlagerungen! - Check mal deine Flap Position - Check mal deine Engine Daten (laufen alle Rund wie sie sollten, hast du mit den Fuel eingaben im FMC vielleicht Probleme (falls überhaupt ein FMC vorhanden ist)... Ansonsten könnt es auch ein Gauge Problem im FSX sein... oder so... Sorry dass ich dir mit weiteren Angaben bezüglich deines Problems hier nicht gross weiterhelfen kann... bin auch immernoch begeisterter FS9 User! FSX werde ich auch in naher Zukunft nicht anfassen! Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Airberlin198 Geschrieben 26. Februar 2012 Autor Teilen Geschrieben 26. Februar 2012 Hallo Thomas 1. Das geht hier auch so: 2. Mögliche Lösung: - Das sieht mir nach nem Stall bzw Strömungsabriss aus (bei der Tiefe in der du fliegst, da kann man dich ja nicht mal auf dem Radar finden :P) Bist du evtl von einer zu kurzen Rwy gestartet? Dann wärs klar dass du noch viel zu schwer bist und deswegen wieder abschmierst! - Check mal deine Gewichtsverlagerungen! - Check mal deine Flap Position - Check mal deine Engine Daten (laufen alle Rund wie sie sollten, hast du mit den Fuel eingaben im FMC vielleicht Probleme (falls überhaupt ein FMC vorhanden ist)... Ansonsten könnt es auch ein Gauge Problem im FSX sein... oder so... Sorry dass ich dir mit weiteren Angaben bezüglich deines Problems hier nicht gross weiterhelfen kann... bin auch immernoch begeisterter FS9 User! FSX werde ich auch in naher Zukunft nicht anfassen! Also erst einmal danke für einige Denkanstöße :) Jedoch lag es weder an einem Strömungsabriss, an den Flaps oder an den Triebwerken, sondern das Flugzeug steuert immer nach unten, wenn ich zum Beispiel von Friday Harbor starte. Als ich dann einmal von einer Runway starten wollte, konnte ich die Nase auch nicht nach oben tun, weil das Flugzeug die ganze Zeit nach unten mit der Nase wollte. Hier einmal die Aircraft, vielleicht ist da etwas falsch :confused: [fltsim.0]title=SkySpirit 2011 - Boeing 747-8i Boeing Sunrize Livery YU sim=Skyspirit 747-8 Series model= panel= sound= texture=n6067e kb_checklists=boeing747_check kb_reference=boeing747_ref atc_airline=Boeing atc_flight_number=008 atc_parking_types=GATE, RAMP atc_parking_codes=BOE ui_typerole=Commercial Airliner ui_createdby=SkySpirit2011 ui_manufacturer=SkySpirit2011 ui_type=747-8I ui_variation=Boeing First Flight Livery visual_damage=1 atc_heavy=1 atc_id= description=Project Opensky - 747-400BCF\nVersion 2006.9.7-FSX\n\nEngine Type GE CF6-80C2B1\n\n747-400 Commercial Version \n\nModel Designer\n Hiroshi Igami\n\nFlight Dynamics Designers\n Warren C. Daniel\n Brandon D. Henry\n\nMaster Texture Designer\n Corey Ford\n\nTest Pilots\n Project Opensky Members\n\nMaximun Range: 4100 nm\n\nFor proper operation: See B747 manual at: \n http://www.project-opensky.com [General] performance=See boeing.com atc_type=BOEING atc_model=B747 editable=0 Category=airplane [pitot_static] vertical_speed_time_constant=9 //Increasing this value will cause a more instantaneous reaction in the VSI pitot_heat=1.000000 [WEIGHT_AND_BALANCE] empty_weight= 421200.000 max_gross_weight= 975000.000 reference_datum_position = 97.0, 0, 0 empty_weight_CG_position = -95.0, 0, 0 //-97.0, 0, 0 max_number_of_stations = 8 station_load.0 = "9720, -160.0, 0.0, 0.0, Aft Bulk - Payload" // Weight (lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.1 = "37500, -130.0, 0.0, 0.0, LD aft - Payload" // Weight (lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.2 = "41000, -60.0, 0.0, 0.0, LD fwd - Payload" // Weight (lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.3 = "28307, -40.0, 0.0, 0.0, Main Dk - Payload" // Weight (lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.3 = "30000, -25.0, 0.0, 0.0, Main Dk - Payload" // Weight (lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.4 = "2640, -40.0, 0.0, 20.0, Upper Dk - Payload" // Weight (lbs), longitudinal, lateral, vertical positions from datum (feet) // Moments of Inertia empty_weight_roll_MOI= 27018662.500 //---------------- 48018662.500 empty_weight_pitch_MOI= 26713121.500 empty_weight_yaw_MOI= 22700000.000 //---------------- 70309608.000 //[Original], 54700000.000 //[secondary] empty_weight_coupled_MOI= 0.000 [fuel] Center1 = -100.000, 0.0, -4.0, 20855.7, 3.0 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) Center2 = -220.500, 0.0, 6.0, 4967.3, 3.0 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) Center3 = -100.000, 0.0, 6.0, 3420.0, 3.0 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) LeftMain = -102.000, -35.0, -4.0, 12434.6, 3.0 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) LeftAux = -108.500, -52.0, -3.0, 4971.4, 3.0 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) RightMain = -102.000, 35.0, -4.0, 12434.6, 3.0 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) RightAux = -108.500, 52.0, -3.0, 4971.4, 3.0 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) fuel_type = 2 //Fuel type: 1 = Avgas, 2 = JetA number_of_tank_selectors = 1 electric_pump=1 [airplane_geometry] wing_area= 5650.000 wing_span= 224.700 wing_root_chord= 23.000 wing_dihedral= 6.998 wing_incidence= 2.000 wing_twist= -0.994 oswald_efficiency_factor= 0.830 wing_winglets_flag= 1 wing_sweep= 37.500 wing_pos_apex_lon= -55.100 wing_pos_apex_vert= 0.000 htail_area= 2500.000 //1470.000 htail_span= 72.750 htail_pos_lon= -220.000 //-219.000 htail_pos_vert= 10.000 htail_incidence= 9.200 //0.000 htail_sweep= 37.500 vtail_area= 2600.000 //1060.000 vtail_span= 37.121 vtail_sweep= 45.000 vtail_pos_lon= -200.500 vtail_pos_vert= 20.083 elevator_area= 326.800 aileron_area= 360.000 //225.200 rudder_area= 229.900 elevator_up_limit= 24.000 elevator_down_limit= 18.000 aileron_up_limit= 20.000 aileron_down_limit= 20.000 rudder_limit= 30.000 elevator_trim_limit= 10.000 //24.000 spoiler_limit= 45.000 spoilerons_available= 1 //---------------- aileron_to_spoileron_gain= 1 //---------------- min_ailerons_for_spoilerons= 1.0 //---------------- min_flaps_for_spoilerons= 0 auto_spoiler_available=1 spoiler_extension_time=2.000000 positive_g_limit_flaps_up=4.000000 positive_g_limit_flaps_down=3.000000 negative_g_limit_flaps_up=-3.000000 negative_g_limit_flaps_down=-2.000000 [Reference Speeds] flaps_up_stall_speed = 165.0 //Knots True (KTAS) full_flaps_stall_speed = 135.0 //Knots True (KTAS) cruise_speed = 495.0 //Knots True (KTAS) max_indicated_speed=365.000000 max_mach=0.920000 [flaps.0] type = 1 // 1 - tail, 2 - lead span-outboard = 0.8 // 0.0 .. 1.0 extending-time = 25 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 1 // degrees flaps-position.2 = 5 // degrees flaps-position.3 = 10 // degrees flaps-position.4 = 20 // degrees flaps-position.5 = 25 // degrees flaps-position.6 = 30 // degrees damaging-speed = 200 // KIAS blowout-speed = 250 // KIAS lift_scalar = 0.28 drag_scalar = 0.40 pitch_scalar= 0.45 system_type = 1 //Hydraulic [flaps.1] type = 1 // 1 - tail, 2 - lead span-outboard = 0.2 // 0.0 .. 1.0 extending-time = 25 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 1 // degrees flaps-position.2 = 5 // degrees flaps-position.3 = 10 // degrees flaps-position.4 = 20 // degrees flaps-position.5 = 25 // degrees flaps-position.6 = 30 // degrees damaging-speed = 200 // KIAS blowout-speed = 250 // KIAS lift_scalar = 0.28 drag_scalar = 0.40 pitch_scalar= 0.45 system_type = 1 //Hydraulic [flaps.2] type = 2 // 1 - tail, 2 - lead span-outboard = 0.8 // 0.0 .. 1.0 extending-time = 12 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 10.0 // degrees flaps-position.2 = 20.0 // degrees flaps-position.3 = 20.0 // degrees flaps-position.4 = 20.0 // degrees flaps-position.5 = 20.0 // degrees flaps-position.6 = 20.0 // degrees damaging-speed = 250 // KIAS blowout-speed = 300 // KIAS lift_scalar = 0.28 drag_scalar = 0.40 pitch_scalar= 0.45 system_type = 1 //Hydraulic [flaps.3] type = 2 // 1 - tail, 2 - lead span-outboard = 0.5 // 0.0 .. 1.0 extending-time = 12 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 20.0 // degrees flaps-position.2 = 20.0 // degrees flaps-position.3 = 20.0 // degrees flaps-position.4 = 20.0 // degrees flaps-position.5 = 20.0 // degrees flaps-position.6 = 20.0 // degrees damaging-speed = 250 // KIAS blowout-speed = 300 // KIAS lift_scalar = 0.28 drag_scalar = 0.40 pitch_scalar= 0.45 system_type = 1 //Hydraulic [flaps.4] type = 2 // 1 - tail, 2 - lead span-outboard = 0.2 // 0.0 .. 1.0 extending-time = 12 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 20.0 // degrees flaps-position.2 = 20.0 // degrees flaps-position.3 = 20.0 // degrees flaps-position.4 = 20.0 // degrees flaps-position.5 = 20.0 // degrees flaps-position.6 = 20.0 // degrees damaging-speed = 250 // KIAS blowout-speed = 300 // KIAS lift_scalar = 0.28 drag_scalar = 0.40 pitch_scalar= 0.45 system_type = 1 //Hydraulic [flight_tuning] cruise_lift_scalar = 1.0 parasite_drag_scalar = 1.0 induced_drag_scalar = 1.0 elevator_effectiveness = 1.25 aileron_effectiveness = 1.50 //---------------- rudder_effectiveness = 1.20 //0.75 pitch_stability = 1.0 roll_stability = 1.0 yaw_stability = 1.0 elevator_trim_effectiveness = 2.000 //0.75 aileron_trim_effectiveness = 0.65 rudder_trim_effectiveness = 0.65 [GeneralEngineData] engine_type= 1 Engine.0= -105.600, -69.500, 0.000 Engine.1= -75.600, -39.167, -7.000 Engine.2= -75.600, 39.167, -7.000 Engine.3= -105.600, 69.500, 0.000 fuel_flow_scalar= 0.9676 min_throttle_limit=-0.319946 [TurbineEngineData] bypass_ratio=4.970 fuel_flow_gain=0.002000 inlet_area=40.68 rated_N2_rpm=29920.000000 static_thrust= 66500.000 afterburner_available= 0 reverser_available= 1 [jet_engine] thrust_scalar = 1.0 [autopilot] autopilot_available=1 flight_director_available=1 default_vertical_speed=800.000000 autothrottle_available=1 autothrottle_arming_required=1 autothrottle_takeoff_ga=1 autothrottle_max_rpm=105.000000 pitch_takeoff_ga=8.000000 use_no_default_pitch = 1 // 0 = Default to current pitch mode, 1 = No default pitch mode. use_no_default_bank = 1 // 0 = Default to Wing Leveler mode, 1 = No default bank mode. default_pitch_mode=0 default_bank_mode=0 max_pitch=10.000000 max_pitch_acceleration=1.000000 max_pitch_velocity_lo_alt=2.000000 max_pitch_velocity_hi_alt=0.300000 max_pitch_velocity_lo_alt_breakpoint= 7000.000000 max_pitch_velocity_hi_alt_breakpoint=24000.000000 max_bank=25.000000 max_bank_acceleration=1.800000 max_bank_velocity=3.000000 max_throttle_rate=0.03000 nav_proportional_control=9.000000 nav_integrator_control=0.250000 nav_derivative_control=0.000000 nav_integrator_boundary=2.500000 nav_derivative_boundary=0.000000 gs_proportional_control=9.520000 gs_integrator_control=0.260000 gs_derivative_control=0.000000 gs_integrator_boundary=0.700000 gs_derivative_boundary=0.000000 yaw_damper_gain=1.000000 [contact_points] //0 Class <0=none,1=wheel, 2=scrape, 3=float> //1 Longitudinal Position (feet) //2 Lateral Position (feet) //3 Vertical Position (feet) //4 Impact Damage Threshold (Feet Per Minute) //5 Brake Map (0=None, 1=Left, 2=Right) //6 Wheel Radius (feet) //7 Steer Angle (degrees) //8 Static Compression (feet) (0 if rigid) //9 Max/Static Compression Ratio //10 Damping Ratio (0=Undamped, 1=Critically Damped) //11 Extension Time (seconds) //12 Retraction Time (seconds) //13 Sound Type //14 Airspeed limit for retraction (KIAS) //15 Airspeed that gear gets damage at (KIAS) point.0 = 1.000, -2.333, 0.000, -14.433, 5181.102, 0.000, 2.042, 80.000, 0.660, 0.650, 0.880, 11.000, 11.000, 0.000, 240.000, 280.000 // Nose Gear point.1 = 1.000, -110.583, -6.350, -15.403, 3574.803, 1.000, 1.917, 0.000, 1.620, 1.150, 0.841, 12.900, 14.900, 2.000, 240.000, 280.000 // Main Center Gear - Left point.2 = 1.000, -110.583, 6.350, -15.403, 3574.803, 2.000, 1.917, 0.000, 1.620, 1.150, 0.841, 13.100, 15.400, 3.000, 240.000, 280.000 // Main Center Gear - Right point.3 = 1.000, -102.083, -18.000, -15.403, 3574.803, 0.000, 1.917, 0.000, 1.620, 1.150, 0.841, 12.900, 14.900, 2.000, 240.000, 280.000 // Main Wing Gear - Left point.4 = 1.000, -102.083, 18.000, -15.403, 3574.803, 0.000, 1.917, 0.000, 1.620, 1.150, 0.841, 13.100, 15.400, 3.000, 240.000, 280.000 // Main Wing Gear - Right point.5 = 2.000, -146.000, -102.900, 7.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000 point.6 = 2.000, -146.000, 102.900, 7.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6.000, 0.000, 0.000 point.7 = 2.000, -189.667, 0.000, -2.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000 point.8 = 2.000, -9.167, 0.000, -5.750, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4.000, 0.000, 0.000 point.9 = 2.000, -229.667, 0.000, 55.500, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 8.000, 0.000, 0.000 point.10= 2.000, -106.400, -69.500, -5.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000 point.11= 2.000, -76.300, -39.167, -9.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000 point.12= 2.000, -76.300, 39.167, -9.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000 point.13= 2.000, -106.400, 69.500, -5.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000 point.14= 2.000, 0.000, 0.000, 0.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4.000, 0.000, 0.000 static_pitch= -2.000 //1.500 static_cg_height= 12.500 gear_system_type=0 // Nose gear //point.0= 1.000, -20.333, -1.500, -13.750, 2181.102, 0.000, 2.000, 70.000, 0.300, 0.500, 0.880, 11.000, 11.000, 0.000, 240.000, 280.000 //point.1= 1.000, -20.333, 1.500, -13.750, 2181.102, 0.000, 2.000, 70.000, 0.300, 0.500, 0.880, 11.000, 11.000, 0.000, 240.000, 280.000 // // Main Wing Gear (left) //point.2= 1.000, -104.583, -18.000, -16.533, 1574.803, 1.000, 2.000, -13.000, 2.602, 2.500, 0.551, 12.900, 14.900, 2.000, 240.000, 280.000 //point.3= 1.000, -104.583, -14.000, -16.533, 1574.803, 1.000, 2.000, -13.000, 2.602, 2.500, 0.551, 12.900, 14.900, 2.000, 240.000, 280.000 //point.4= 1.000, -99.583, -18.000, -16.533, 1574.803, 1.000, 2.000, -13.000, 2.602, 2.500, 0.551, 12.900, 14.900, 2.000, 240.000, 280.000 //point.5= 1.000, -99.583, -14.000, -16.533, 1574.803, 1.000, 2.000, -13.000, 2.602, 2.500, 0.551, 12.900, 14.900, 2.000, 240.000, 280.000 // // Main Wing Gear (right) //point.6= 1.000, -104.583, 18.000, -16.533, 1574.803, 2.000, 2.000, -13.000, 2.602, 2.500, 0.551, 15.100, 16.400, 3.000, 240.000, 280.000 //point.7= 1.000, -104.583, 14.000, -16.533, 1574.803, 2.000, 2.000, -13.000, 2.602, 2.500, 0.551, 15.100, 16.400, 3.000, 240.000, 280.000 //point.8= 1.000, -99.583, 18.000, -16.533, 1574.803, 2.000, 2.000, -13.000, 2.602, 2.500, 0.551, 15.100, 16.400, 3.000, 240.000, 280.000 //point.9= 1.000, -99.583, 14.000, -16.533, 1574.803, 2.000, 2.000, -13.000, 2.602, 2.500, 0.551, 15.100, 16.400, 3.000, 240.000, 280.000 // // Main Center Gear (left) //point.10= 1.000, -115.583, -8.000, -16.533, 1574.803, 1.000, 2.000, 0.000, 2.602, 2.500, 0.551, 13.400, 14.900, 2.000, 240.000, 280.000 //point.11= 1.000, -115.583, -4.000, -16.533, 1574.803, 1.000, 2.000, 0.000, 2.602, 2.500, 0.551, 13.400, 14.900, 2.000, 240.000, 280.000 //point.12= 1.000, -109.583, -8.000, -16.533, 1574.803, 1.000, 2.000, 0.000, 2.602, 2.500, 0.551, 13.400, 14.900, 2.000, 240.000, 280.000 //point.13= 1.000, -109.583, -4.000, -16.533, 1574.803, 1.000, 2.000, 0.000, 2.602, 2.500, 0.551, 13.400, 14.900, 2.000, 240.000, 280.000 // // Main Center Gear (right) //point.14= 1.000, -115.583, 8.000, -16.533, 1574.803, 2.000, 2.000, 0.000, 2.602, 2.500, 0.551, 11.500, 17.500, 3.000, 240.000, 280.000 //point.15= 1.000, -115.583, 4.000, -16.533, 1574.803, 2.000, 2.000, 0.000, 2.602, 2.500, 0.551, 11.500, 17.500, 3.000, 240.000, 280.000 //point.16= 1.000, -109.583, 8.000, -16.533, 1574.803, 2.000, 2.000, 0.000, 2.602, 2.500, 0.551, 11.500, 17.500, 3.000, 240.000, 280.000 //point.17= 1.000, -109.583, 4.000, -16.533, 1574.803, 2.000, 2.000, 0.000, 2.602, 2.500, 0.551, 11.500, 17.500, 3.000, 240.000, 280.000 // //Scrape points //point.18 = 2.000, -146.000, -102.900, 7.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000 //point.19 = 2.000, -146.000, 102.900, 7.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6.000, 0.000, 0.000 //point.20 = 2.000, -189.667, 0.000, -2.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000 //point.21 = 2.000, -9.167, 0.000, -5.750, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4.000, 0.000, 0.000 //point.22 = 2.000, -229.667, 0.000, 55.500, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 8.000, 0.000, 0.000 //point.23 = 2.000, -106.400, -69.500, -5.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000 //point.24 = 2.000, -76.300, -39.167, -9.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000 //point.25 = 2.000, -76.300, 39.167, -9.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000 //point.26 = 2.000, -106.400, 69.500, -5.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000 //point.27 = 2.000, 0.000, 0.000, 0.000, 787.402, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4.000, 0.000, 0.000 // //static_pitch= 0.000 //static_cg_height= 13.625 //gear_system_type=0 [TailHook] // For opening cargo door. tailhook_length=1 ;(feet) tailhook_position = 0.0, 0.0, 0.0 ;(feet) longitudinal, lateral, vertical positions from datum [folding_wings] // For opening main deck cargo door. wing_fold_system_type = 4 ;0=None fold_rates = 0.05,0.05 ;Percent per second cable_force_adjust = 1.0 [Views] eyepoint=-14.000, -2.000, 14.800 // Longitude, Latitude and Vertical position from Reference Point, (FEET) [electrical] // ;BusType, MaxAmpLoad, MinVoltage BusTypes:0=MainBus,1=AvionicsBus,2=BatteryBus,3=HotBatteryBus,4-7=Generator/AlternatorBus(1-4) flap_motor = 1, 0 , 1.0 gear_motor = 0, 5 , 17.0 avionics_bus = 0, 0 , 1.0 avionics = 1, 5 , 17.0 pitot_heat = 0, 0 , 1.0 additional_system = 0, 0 , 1.0 marker_beacon = 1, 2 , 17.0 gear_warning = 7, 0 , 99.0 gear_motor = 4, 0 , 1.0 fuel_pump = 0, 0 , 1.0 fuel_transfer_pump = 0, 0 , 1.0 starter1 = 0, 20, 17.0 starter2 = 0, 0 , 1.0 light_nav = 0, 0 , 1.0 light_beacon = 0, 0 , 1.0 light_landing = 0, 0 , 1.0 light_taxi = 0, 0 , 1.0 light_strobe = 0, 0 , 1.0 light_panel = 0, 7 , 99.0 light_recognition = 0, 0 , 1.0 light_wing = 0, 0 , 1.0 marker_beacon = 0, 0 , 1.0 standby_vacuum = 0, 0 , 1.0 auto_brakes = 0, 0 , 1.0 hydraulic_pump = 0, 0 , 1.0 propeller_device = 0, 0 , 1.0 [Radios] // Radio Type = availiable, standby frequency, has glide slope Audio.1 = 1 Com.1 = 1, 1 Com.2 = 1, 1 Nav.1 = 1, 1, 1 Nav.2 = 1, 1, 0 Adf.1 = 1 Transponder.1 = 1 Marker.1 = 1 [direction_indicators] //1 Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro, 3=Electro-Mag Slaved Compass, 4=Slaved to another //2 Indicator number of slaving indicator if Type = 4 direction_indicator.0=3,0 [keyboard_response] //Breakpoint speeds (knots) on the keyboard increments of control surfaces. //Speed at which the incremenet is reduced to 1/2 and 1/8 respectively. elevator = 100, 200 aileron = 100, 200 rudder = 100, 200 [exits] number_of_exits = 4 // SP //exit.0 = 0.10, -43.00, -9.0, 0.0, 0 //Main Pax Door, L1 Door, Main level //exit.1 = 0.12, -58.00, 7.0, -7.0, 1 //Fwd Lower Right Cargo Door //exit.2 = 0.12, -128.00, 7.0, -7.0, 1 //Aft Lower Right Cargo Door // -100, -200, -300, -400 //number_of_exits = 6 //exit.0 = 0.10, -54.00, -9.0, 0.0, 0 //Main Pax Door, L1 Door, Main level - Reserved for Cargo models //exit.1 = 0.10, -72.00, -9.0, 0.0, 0 //Main Pax Door, L2 Door, Main level //exit.2 = 0.12, -54.00, 7.0, -7.0, 1 //Fwd Lower Right Cargo Door //exit.3 = 0.12, -156.00, 7.0, -7.0, 1 //Aft Lower Right Cargo Door //exit.4 = 0.12, -156.00, -7.0, 0.0 1 //Main Deck, Large Cargo Door, Aft, Left Side - Reserved for Cargo models //exit.5 = 0.12, -167.00, 7.0, 7.0 0 //Lower Air Stair - Reserved for VC-25A exit.0 = 0.10, -54.00, -9.0, 0.0, 0 //Main Pax Door, L1 Door, Main level - Reserved for Cargo models exit.1 = 0.12, -54.00, 7.0, -7.0, 1 //Fwd Lower Right Cargo Door exit.2 = 0.10, -72.00, -9.0, 0.0, 0 //Main Pax Door, L2 Door, Main level exit.3 = 0.12, -167.00, 7.0, 7.0 1 //Lower Air Stair - Reserved for VC-25A [forcefeedback] gear_bump_nose_magnitude=3000 ; 0 - 10000 gear_bump_nose_direction=18000 ; 0 - 35999 degrees gear_bump_nose_duration=250000 ; in microseconds gear_bump_left_magnitude=2700 ; 0 - 10000 gear_bump_left_direction=35500 ; 0 - 35999 degrees gear_bump_left_duration=250000 ; in microseconds gear_bump_right_magnitude=2700 ; 0 - 10000 gear_bump_right_direction=00500 ; 0 - 35999 degrees gear_bump_right_duration=250000 ; in microseconds ground_bumps_magnitude1=1300 ; 0 - 10000 ground_bumps_angle1=08900 ; 0 - 35999 degrees ground_bumps_intercept1=3.0 ground_bumps_slope1=0.20 ground_bumps_magnitude2=200 ; 0 - 10000 ground_bumps_angle2=09100 ; 0 - 35999 degrees ground_bumps_intercept2=1.075 ground_bumps_slope2=0.035 crash_magnitude1=10000 ; 0 - 10000 crash_direction1=01000 ; 0 - 35999 degrees crash_magnitude2=10000 ; 0 - 10000 crash_direction2=9000 ; 0 - 35999 degrees crash_period2=75000 ; in microseconds crash_duration2=2500000 ; in microseconds [EFFECTS] wake=fx_wake water=fx_spray dirt=fx_tchdrt concrete=Opensky_sparks, 1 touchdown=fx_tchdwn, 1 [sMOKESYSTEM] //Aileron tip vortecies smoke.0=0, -127.167, -86.167, Opensky_vortex smoke.1=0, -127.167, 86.167, Opensky_vortex //Wing condensation smoke.2=0, -105.917, -39.167, Opensky_conden smoke.3=0, -105.917, 39.167, Opensky_conden [LIGHTS] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing 6=taxi, 7=recognition, 8=wing, 9=logo //light.0 = 3, -224.700, -0.250, 12.000, Opensky_nav_yellow , //light.1 = 3, -224.700, 0.250, 12.000, Opensky_nav_yellow , //light.2 = 2, -224.700, 0.000, 11.000, fx_strobeh , //light.3 = 3, -13.850, 0.000, 14.850, fx_vclighth , //light.4 = 9, -208.500, -4.500, 43.750, Opensky_wing_light , // <-----3 previously //light.9 = 9, -208.500, 4.500, 43.750, Opensky_wing_light , // <-----3 previously //light.10= 5, -79.700, -29.200, -2.000, Opensky_nacelle_refl , //light.11= 5, -79.700, 29.200, -2.000, Opensky_nacelle_refl , //light.12= 5, -46.500, -11.700, 0.000, Opensky_nacelle_refl , //light.13= 5, -46.500, 11.700, 0.000, Opensky_nacelle_refl , //light.14= 5, -40.500, -13.700, 1.900, Opensky_nacelle_refl , //light.15= 5, -40.500, 13.700, 1.900, Opensky_nacelle_refl , //light.16= 5, -14.333, 0.000, -2.000, Opensky_nacelle_refl , //light.5= 3, -18.300, -6.500, 6.000, Opensky_nacelle_refl , //light.6= 3, -52.610, -4.500, 6.000, Opensky_nacelle_refl , //light.7= 3, -144.510, 0.000, -3.000, Opensky_wing_light , light.0= 6, 0.000, 0.000, -3.350, Opensky_wing_light, // gear bay taxi light rays from taxi lights light.1= 4, 0.000, 0.000, 10.350, fx_vclighth, // gear bay taxi light rays from taxi lights //================================================================ //New for FSX //================================================================ Category=airplane [CameraDefinition.0] Title = "Right Wing View" Guid = {54F54B8A-3EC2-2D4E-8D10-B8F9D0F16ACC} Description = View of the right wing from the passenger cabin Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.65 ShowWeather = Yes InitialXyz = 3.2, 1.8, -5 InitialPbh = 5, 0, 100 XyzAdjust = TRUE Category=Aircraft MomentumEffect=TRUE ClipMode=Minimum [CameraDefinition.1] Title = "Left Wing View" Guid = {0ae3f864-da10-4e5a-977c-b9bba47d6f7a} Description = View of the left wing from the passenger cabin Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.65 ShowWeather = Yes InitialXyz = -3.2, 1.8, -5 InitialPbh = 5, 0, 260 XyzAdjust = TRUE Category=Aircraft MomentumEffect=TRUE ClipMode=Minimum [CameraDefinition.2] Title = "Main Landing Gear" Guid = {96873AAD-621B-4C45-8A58-DEF7B7FCB051} Description = View of the Main Landing Gear Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = FALSE InitialZoom = .45 ShowWeather = Yes InitialXyz = 0, -5.0, 15.0 InitialPbh = -10, 0, 180 XyzAdjust = TRUE Category=Aircraft MomentumEffect=FALSE ClipMode=Minimum [CameraDefinition.3] Title = "Pushback Tug" Guid = {f25dfa2e-fd2e-4b89-81e2-0575cbcb60de} Description = Walking with the pushback tug Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = .50 ShowWeather = Yes InitialXyz = 3.0, -2.0, 42.0 InitialPbh = -8, 0, 190 XyzAdjust = TRUE Category=Aircraft MomentumEffect= No ClipMode=Minimum [CameraDefinition.4] Title = "Air stair view" Guid = {5c1df273-034b-4e7f-953a-9d5e26f1646c} Description = Looking at the air stair Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = .50 ShowWeather = Yes InitialXyz = -13.0, -2, 10.00 InitialPbh = -10, 0, 55 XyzAdjust = TRUE Category=Aircraft MomentumEffect= No ClipMode=Minimum [CameraDefinition.001] Title = "Right Seat" Guid = {8ff6c134-098d-409f-baec-caba3f683f98} Origin = Virtual Cockpit MomentumEffect = YES SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = 0.75 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=True Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=1.0, -0.0, 0.0 InitialPbh=0, 0, 0 [CameraDefinition.002] Title = "Center Pedistal" Guid = {195EAB58-9E4A-2E2A-A34C-A8D9D948F078} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = None SnapPbhReturn = False PanPbhAdjust = None PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.50 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = No XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.5, 0.0, 0.0 InitialPbh=80, 0, 0 [CameraDefinition.003] Title = "Overhead Panel" Guid = {4ca337db-ae88-4c5f-96ea-ddebbd2a86fe} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = None SnapPbhReturn = False PanPbhAdjust = None PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.45 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.5, 0.0, 0.0 InitialPbh=-40.0, 0, 0 [CameraDefinition.004] Title = "Flight Engineer Panel" Guid = {C690EAFD-223A-42d0-99E0-681ADF93BB59} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = None SnapPbhReturn = False PanPbhAdjust = None PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.50 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.7, 0.0, -1.5 InitialPbh=5.0, 0, 90.0 [vacuum_system] max_pressure=5.150000 vacuum_type=2 electric_backup_pressure=0.000000 engine_map=0,0,0,0 [pneumatic_system] max_pressure=18.000000 bleed_air_scalar=1.000000 structural_deice_type=0 [deice_system] structural_deice_type=1 //0 = None, 1 = Heated Leading Edge, 2 = Bleed Air Boots, 3 = Eng Pump Boots [brakes] //================================================================ //New for FSX //================================================================ parking_brake = 1 // Parking brake available toe_brakes_scale = 0.9155 //Brake scalar auto_brakes = 5 hydraulic_system_scalar = 1 //On brakes dependant on the hydraulic system, ratio hyd system to max brake hyd pressure [stall_warning] //================================================================ //New for FSX //================================================================ type=2 stick_shaker=1 [gear_warning_system] gear_warning_available=0 pct_throttle_limit=0.099976 flap_limit_power=25.496622 flap_limit_idle=5.042029 [hydraulic_system] electric_pumps=0 engine_map=1,1,1,1 normal_pressure=3000.000000 [attitude_indicators] attitude_indicator.0=1 [turn_indicators] turn_indicator.0=1,0 [GPWS] max_warning_height = 1000 sink_rate_fpm = -3800 excessive_sink_rate_fpm = -5500 climbout_sink_rate_fpm = -1000 flap_and_gear_sink_rate_fpm= -1400 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Airbasil Geschrieben 26. Februar 2012 Teilen Geschrieben 26. Februar 2012 Hallo Thomas, na dann liegts wohl daran dass dein Flugzeug falsch getrimmt ist! Schätzungsweise! Hat sonst jemand ne andere Lösung?? Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Airberlin198 Geschrieben 26. Februar 2012 Autor Teilen Geschrieben 26. Februar 2012 Hallo Thomas, na dann liegts wohl daran dass dein Flugzeug falsch getrimmt ist! Schätzungsweise! Hat sonst jemand ne andere Lösung?? Sorry, wenn ich mich so blöd anstelle. Aber was ist trimmen? :confused: Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Airbasil Geschrieben 26. Februar 2012 Teilen Geschrieben 26. Februar 2012 Sorry, wenn ich mich so blöd anstelle. Aber was ist trimmen? :confused: Guckst du! Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Stefi Geschrieben 26. Februar 2012 Teilen Geschrieben 26. Februar 2012 Sorry, wenn ich mich so blöd anstelle. Aber was ist trimmen? :confused: Hi Thomas Lies mal das hier: http://dieluftfahrt.blogspot.com/2006/08/flugzeug-und-trimmung.html Vielleicht hilft es dir zu verstehen um was es geht. Gruss Stefan Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Empfohlene Beiträge
Dein Kommentar
Du kannst jetzt schreiben und Dich später registrieren. Wenn Du ein Konto hast, melde Dich jetzt an, um unter Deinem Benutzernamen zu schreiben.